Whether we realize it or not, many of us have trembling hands.
It is a common phenomenon among photographers to have blurry photos, especially when taking pictures by hand (without a tripod).
It is undoubtedly one of the biggest drawbacks to hand photography. It hurts photographers the most to take landscape photos, and camera shake can easily ruin an image.
While there is no way to fix this, there are some best practices to significantly minimize the impact.
This article outlines some of the best ways to avoid hand shake blur.
1. Stabilize the whole body
Let’s start with the most practical and least technical tip for hand shots.
If you don’t have a tripod, you become a human tripod It is always a good idea to stabilize the whole body against a tree or a wall.
You can even sit, crouch, or lie down to keep your body steady, which essentially means stabilizing your camera and reducing camera shake.
2nd Use image stabilization
Many modern camera manufacturers such as Nikon, Canon and others have integrated image stabilization technology. Typically, you can activate this feature using a switch that is often attached to the side of a compatible lens. Activating this function activates the image stabilization function, which compensates for any jiggling during exposure.
Some manufacturers, such as Pentax and Sony, go a step further with some of their cameras by providing image stabilizers in the body. The main advantage of stabilization in the body is that you can use any compatible lens. You can use a variety of lenses to take stable pictures.
3rd Use the self-timer
Whenever you press the shutter button on your camera, insert a very small movement that can result in blurred images. You can fix this problem using your camera’s self-timer function.
You can delay the shutter on your camera by setting up the self-timer function, which can be set to several seconds. When you press the shutter button, your camera waits for the number of seconds you specify and then takes the picture.
This essentially eliminates the need to touch the camera to press the shutter release button and cause some camera shake.
4th Use faster lenses
Increasing the shutter speed of your camera is one of the best ways to avoid blurry pictures – if the lighting conditions are right. You can either slow down your camera’s shutter speed or use a shorter lens. Typically, fast lenses have an aperture of 1: 2.8 or less, such as 1: 1.4 or even 1: 1.2.
However, these lenses can cost a premium. However, if you often take pictures in low light conditions where a faster lens can be useful, investing in fast lenses is a breeze.
5. Use burst mode
All modern cameras are equipped with a so-called “Burst mode. ”In this mode you can take several pictures in quick succession. When shooting in burst mode, you hear a quick release when you press the shutter button – this is your camera that takes multiple shots at once. You can then find the perfect still from this collection.
6. Increase ISO
There is a common misconception that ISO affects the sensitivity of your camera sensor to light. In reality, ISO electronically amplifies the signal that the sensor records.
Always remember that the ISO value is directly proportional to the image brightness with additional noise. A little bit of digital noise didn’t hurt anyone. Therefore, look at the somewhat noisy images above the blurry and blurred images.
My best suggestion is to increase the value of your ISO for a comparatively fast and reasonable shutter speed to get the right exposure. There is no point in increasing your ISO to 3200 if 400 would.
7. Avoid enlarging
When shooting with a zoom lens, it may be best to keep the lens at the minimum focal length. For example, if you’re shooting with an 18-55mm lens, the aperture is likely to be variable across the focal length range. If you shoot at 18mm, you may be at 1: 2.8, but when you reach the 55mm focal length, you’re at 1: 5.6.
It is obvious that if you narrow your field of vision, everything in your image will be highlighted. Also keep in mind that a long focal length often requires a faster shutter speed. If you set the shutter speed too slowly, the camera will inevitably blur.
As a rule of thumb, try to adjust your focal length to your shutter speed. For example, if you’re shooting with a full-frame camera and an 85mm lens, you should set the shutter speed to at least 1/85 second or faster.
8th. Capture with a suitable posture
Your posture plays a crucial role in taking still pictures. You’ve probably seen professionals leaning and crouching strangely.
They do this to make it easier to support or support the camera (and to capture certain odd angles). It is best to hold the camera closer to your upper body while your arms are in your body.
Avoid hovering your arms in the air, as this can cause muscle tension, which leads to blurring in your pictures.
9. Use the camera strap
You can use your camera’s strap to prevent camera shake by placing the strap firmly around your arm. In this way, the wrapped belt helps and acts as a stabilizer and reduces muscle tension and tremors. If you need to take a picture with a comparatively slow shutter speed, this technique can help you very effectively.
You can also use the camera strap to create tension. When shooting with the LCD screen, you can put the camera strap around your neck and extend the camera as far as possible for a little more stability.
This works well if you’re shooting low rather than shooting further away from your body (i.e., by stretching the camera strap towards your hips and using the rotating LCD screen to frame your shot).
10th Use a remote release
Last but not least, a remote release is used. If you have very shaky hands, it can be difficult for you to frame and capture crisp, clear images. This is where a remote trigger comes in to save the day.
Remote triggers come in many shapes and forms. The most common is a simple remote control that connects to your camera and allows you to press the trigger remotely without physically touching your camera. This works best when your camera is on a tripod.
You can choose your frame and place your camera on a safe and flat surface in the same direction. Since the camera remains stable on the surface, you have to trigger a signal and that’s it. You get the picture with perfectly stable and focused results. Many remote controls for the trigger are available both wireless and wired.
I hope these tips and tricks will help you with hand shake problems when taking pictures and remove the blurriness of your pictures. Remember to use these expert photography hacks the next time you take photos without a tripod in your hand.